Contact Resistance
Insulation Resistance
Voltage Proof
Terminals
Life Expectancy
a) Mechanical
b) Electrical
|
10 milliohm max.
1000 megaohm min.
1 KV AC for 1 minute
Solder
1 million operations
50,000 operations
|
ELECTRICAL RATING
| Voltage |
Resistive Load (amperes) |
Inductive Load (amperes) |
125 AC
250 AC
125 DC
250 DC |
10
5
1.5 (0.5)
0.5 (0.25) |
5
5
0.5 (0.03)
0.25 (0.02) |
Current values have been assessed on the basis that each mechanism is used to switch only one load, either on it's normally-open
or normally-closed contacts. When two circuits per mechanism are switched the same current values on AC may be used but on
resistive and inductive DC loads the smaller values shown in brackets should be used. Note: Place ‘S’ for Silver Plated and ‘G’ for Gold Plated terminals in bracket ‘( )’ against Ordering Code of Micro Switch.
All dimensions are in mm.
Due to continuous improvement in products, we reserve the right to alter specifications without prior notice |
The diagram indicates the ‘at rest’ position of the switch.
|
