| ------------------------------------------------------------------------- |
| Ordering Code |
MV1( )P3/* |
| ------------------------------------------------------------------------- |
Circuit Facilities
Current Rating
Switch Terminals
Actuating Force
Release Force
Min. Centre Distance
between two adjacent
units
Cut-out Size
|
Instantaneous double
pole, double - break
5A at 250V AC
Solder
562 gms. (max.)
60 gms. (min.)
25.4 mm.
Ø12.5 mm.
|
| ------------------------------------------------------------------------- |
| Ordering Code |
MV1( )P4/* |
| ------------------------------------------------------------------------- |
Circuit Facilities
Current Rating
Switch Terminals
Actuating Force
Release Force
Min. Centre Distance
between two adjacent
units
Cut-out Size
|
Instantaneous double
pole, double - break
5A at 250V AC
Solder
562 gms. (max.)
60 gms. (min.)
19 mm.
Ø6.2 mm.
|
Note :
1. Place 'S' for Silver Plated and 'G' for Gold Plated contacts in bracket '( )' against Ordering Code of micro switch.
2. Add following suffix at * in the Ordering Code of Micro Switch for knob colour.
Red
Green
Yellow |
=R
=G
=Y |
Blue
Black
White |
=BL
=B
=W |
3. Micro control Switch MV1 - Series can also be supplied with Chrome Plated Metal shroud for P2 & P3 Push Button arrangements.
Add suffix 'M' in Ordering Code. eg. :
MV1( ) P2/* (for Plastic shroud)
MV1( ) P2M/* (for Metal shroud)
4. For 4 Pole change over Micro switch with two basic MV1 Micro Switches, please add prefix '2' before the series. eg. : 2MV1( )P1/* |
