|
|
|
Series |
Contact Type |
No. of Contacts
|
Type of Connectors |
Termination Style |
Performance class |
Modification |
|
M |
D |
15 |
P |
11 |
1 |
XX |
|
|
Stamped contacts (5A) - Omitted Machined contacts (7.5A) - D |
09, 15, 25, 37, 50 |
Plug (male)-P
Socket (female)-S |
Solder bucket - 11
PC Straight - 12
PC right angle
7.2 mm Foot Print
Row Pitch 2.54 mm-13**
Row Pitch 2.84 mm-14**
9.4 mm Foot Print
Row Pitch 2.54 mm - 16**
Row Pitch 2.84 mm – 17**
Wire wrap – 15 |
|
|
|
|
|
|
Plating Thickness |
Gold all over |
Selective gold on mating area |
|
Performance Class III |
1 |
4 |
|
Performance Class II |
2 |
5 |
|
Performance Class I |
3 |
6 |
|
|
|
|
|
|
|
|
|
|
|
|
|
**with guided bracket only.
Notes:
1. Shells are mainly supplied with zinc/cadmium plating. Tin plated shells can be
supplied on request. Please add suffix ‘T’.
2. D-connectors are supplied with rigid mounting. For float mounting, please add
suffix ‘F’#.
3. Add suffix ‘B’ for D-sub PC right angle connectors complete with guided plastic
brackets duly screwed to the connector. E.g. M15P141B.
4. If in (3), D-sub connectors are required with bracket (guided) fitted with 4-40UNC
screws, add additional suffix ‘X’, e.g. M9P141BX.
5. Add suffix ‘Y’ if (3) is required with snap lock, e.g. M9P141BY or M9P141BXY.
(With 4-40 UNC screw and snap lock).
6. Add suffix ‘Z’ for D-sub PC right angle connector complete with lock block sets.
7. Add suffix ‘D’ for supply of D-sub connector with dimples on its shell (only
for male connector), e.g. M25P111D or MD25P111D.
8. Add suffix ‘V’ if in (3), D-sub connectors are required with bracket (guided)
fitted with 19 mm. 4-40UNC Screws e.g. M9P1418VX. |
|
|
|
|
|
|
|
|
|