REVERSE EURO CONNECTORS DIN 41612 - 855 - SERIES
 
Plated Through Hole Requirements
Characteristics
  • Gas Tight Press-Fit Connections.
  • No damage to plated-Through Holes.
  • Greater Tolerance in hole specifications.
  • No thermal shock, no solder bridge, no flux contamination.
  • Lower insertions of contacts.
  • Multiple insertions of contacts.
 
Drilled hole size :
Copper plating thickness :
Tin Lead plating thickness :
Finished hole size :
PCB thickness :		 1.15 ± 0.13 mm.
0.0254mm. (min.)
0.00762mm. (min.)
1.016 ± 0.0762
2.4-3.2mm.
 
Ordering Code
Series Form Contant Style No. of Contants Performance class Type Contant arrangement   Termination
855 31 P 32 01 P 13   10
  From R - 31
From R/2 - 32
From M - 33		 Press fit - P
Solder - omitted		 32, 48, 64, 96, 16, 32, 48, 24 Performance Class I - 500 cycles
Performance Class II - 400 cycles
Performance Class III - 50 cycles		 Male - P
Female - S		 From B
96 a, b, c
64 a, c
64 b, c
48 a, b, c (odd)
48 a, b, c (even)
32 a, c (odd)
32 a, c (even)
32 a
32 c
(2.54 mm.)-13
(2.54 mm.)-12
(2.54 mm.)-14
(5.08 mm.)-17
(5.08 mm.)-18
(5.08 mm.)-15
(5.08 mm.)-16
(2.54 mm.)-10
(2.54 mm.)-11		 Female angled solder  pin
3.8-2.5/0.86-0.73         -2



Male angled solder  pin
3.2-2.5/0.86-0.73       -5
4.5-4.0/0.86-0.73       -4
            From R/2
48 a, b, c
32 a, c
16 a
16 a, c (even)
16 a, c (odd)
(2.54 mm.)-23
(2.54 mm.)-22
(2.54 mm.)-21
(5.0 mm.)-25
(5.0 mm.)-26		 Male wire wrap
14.0-13.0/0.86-0.76  -6
16.0-15.0/0.86-0.76  -8
18.0-17.0/0.86-0.76  -10
            From M
24 a, b, c
(2.54 mm.)-32
Note :
  1. Add suffix 'G' for fully gold plated wire wrap contacts.
  2. Add Suffix 'B' or 'L' of 'K' for connectors required with board lock for snap fit on PCB.
    B-Suitable for PCB thickness 1.6 mm.
    L-Suitable for PCB thickness 2.4 mm.
    K-Suitable for PCB thickness 3.2 mm.
  3. Please consult factory for other pin configurations.
 
Previous123456789