HE-11 CONNECTORS DIN 41612 857 - SERIES
 
Characteristics
  • Gas tight press-fit connections.
  • No damage to plated-through holes
  • Greater tolerance in hole specifications.

  • No thermal shock, no solder bridge, no flux contamination.
  • Lower insertion force.
  • Multiple insertions of contacts.
 MALE, PRESS FIT, STRAIGHT DIP SOLDER /WIRE WRAP
  (Three Row)
No. of Contacts      Contact Arrangement Ordering code
96                                96 a, b, c
64                                64 a, c
64                                64 b, c
48                                48 a, b, c (odd)
48                                48 a, b, c (even)
32                                32 a, c (odd)
32                                32 a, c (even)
32                                32a
32                                32 c
 85732P96 P13*
857 32P 64 () P12*
85732P64()P14*
857 32P 48 P17*
857 32P 48 () P18*
857 32P 32 () P15*
857 32P 32 () P16*
85732P32 P10*
857 32P 32 () P11*
 
PLATED THROUGH HOLE REQUIREMENTS
Drilled hole size
Copper plating thickness
Tin Lead plating thickness
Finished hole size
PCB thickness
 1.15 ± 0.13 mm.
0.0254 mm. (min.)
0.00762 mm. (min.)
1.016 ± 0.0762
2.4-3.2 mm.
  
 
TERMINATION STYLE  
Style*Pintail length 'a' (mm) Cross section diagonal'd' (mm)
Straight Dip solder         4       4.5-4.0
                                  5       3.2-2.5
Wire wrap                    6       14.0-13.0
                                  8       16.0-15.0
                                  10     18.0-17.0
 0.86-0.73
0.86-0.73
0.86-0.76
0.86-0.76
0.86-0.76
  
Add following at ( ) and * in the ordering code
above for required performance class and pin tail length respectively.
( ) Performance Class I - 500 cycles
    Performance Class II - 400 cycles
    Performance Class III - 50 cycles
* Style
Previous12345Next