Technical Data :
| Operation mode |
Delay on Energise (DE). The relay energises after set interval of time.
Interval On (IT). The relay energises immediately and de-energises after set interval of time.
Cyclic (CY). The relay energises and de-energises in cyclic mode for equal ON and OFF time as per
the dial setting.
Immediate Cyclic (IC). The relay energises immediately for the set ON time and de-energises
for the set OFF time in a cycling mode.
Delayed Cyclic (DC). The relay remain de-energises for the set OFF time and energises
for the set ON time in a cycling mode. |
| Supply Voltages |
12, 24, 48, 110, 220V AC, 50Hz
12, 24, 48, 110V DC
Multi voltage - 24V to 220V AC / DC |
| Supply Voltage tolerance |
±10% |
| Power consumption |
5 V A (max.) |
| Time ranges |
1, 2, 5, 10, 30, 60 seconds
2, 5, 10, 30, 60 minutes
2, 5, 10, 30, 60 hours |
| Repeatability |
1% with fixed off time between runs. |
| Reset Time |
Less than 100ms before timing. 15 ms after timing. |
| Scale range |
2% to 100% |
| Relay |
DPDT |
| Contact Rating |
5A at 230V AC / 28V DC resistive load |
| Transient protection |
120mJ energy pulse |
| Dielectric Strength |
1500 V AC rms for 1 minute |
| Temperature Range |
-10°C to +60°C |
| Electrical life |
0.1 Million operations at rated resistive load |
| Mechanical life |
5 Million operations |
----------------------------------------------------------------------------------
11 Pin Base Wiring
| --------------------------------------------------------- |
| Mode |
Ordering Code |
| --------------------------------------------------------- |
Delay on Energise
Interval on
Cyclic |
2KA DE( )LP*
2KA IT( )LP*
2KA CY( )LP* |
All dimensions are in mm.
Due to continuous improvement in products, we reserve the right to alter specifications without prior notice
|
|
