|
Ordering code |
Description |
|
TB 60/N |
Preassembled TB-60 with N number of ways N = max. 32 nos. on 457.2 mm. long channel
TC 60
|
|
|
|
|
|
Ordering code |
Description |
|
TBA 60/N
|
Preassembled TBA-60 with N number of ways N = max.24 nos. on 457.2 mm. long channel
TC 60
|
|
|
|
|
|
TECHNICAL DATA: |
|
Current carrying capacity |
60 Amps |
|
|
|
|
Body and end plate |
Phenol formaldehyde (bakelite) |
|
|
|
|
Test voltage |
2.0KV AC between adjacent terminals and |
|
|
2.5KV AC between terminals and channels |
|
|
|
|
Wire size |
TB 60 - 10 sq. mm. (max.) |
|
|
TBA 60 - 16 sq. mm. (max.)
|
|
MATERIALS : |
|
Connecting link |
Brass nickel plated |
|
Screws |
Steel zinc plated |
|
Channel |
Steel zinc plated |
|
End clamp and screw |
Steel zinc plated |
|
|
|
|
MOUNTING INSTRUCTIONS |
1. Fix the channel in required position using 2 BA or 3/16" BSF or M5 screws. Slotted
construction avoids the need for exact measurement.
2. Spring the moulded block into the channel.
3. Press downward until the other lip of the channel enters in the opposite end
slot of the block.
The block will remain safely in position until the clamp is fitted.
4. Close up the blocks until the moulded interlocks are engaged and fit a clamp
at each end.
When cutting off the channel, it is advisable to leave it longer to accommodate
possible future additions. Should it be necessary to remove a block for any reason,
loosen one end clamp, slide blocks apart until the interlock is free, press the
block towards springs and lift out.
|
|
Previous123456Next |