SWITCH MODE POWER SUPPLY EPS-SERIES
 
 
Product Specifications
Parameter EPS-60-24 EPS-50-24 EPS-100-24 EPS-200-24 EPS-240-24
Switching Frequency
50 Khz. 25Khz. 25Khz. 25Khz. 25Khz.
Input Voltage Range Universal
(85-270 V AC)
85-130V AC or 190V – 270V AC
(Selectable by inbuilt Switch)
Inrush current 25A at 115V input, 50A at 230V input
Output voltage and
adjustable range
24V DC (+/- 10%)
Output Voltage Ripple 150 mV pk-pk
Leakage Current Less than 3.5 mA at 230 V AC
Output Current Range 0-2.5A 0-2.1A 0-4.5A 0-8.3A 0-10A
Efficiency 79% 78% 83% 83% 82%
Over Load Protection 135-150% 135-150% 135-150% 115-135% 115-135%
Dimensions (LxWxH) mm.
159x97x38 159x97x38 199x98x38 215x115x50 215x115x50
Mounting Screws 3-M3 3-M3 3-M3 4-M4 4-M4
Cooling Free Air convection cooling Forced Air cooling with inbuilts Fan
Weight 510 g. 510 g. 620 g. 930 g. 1150 g.
           


Product Specifications
Parameter EPS-15-5 EPS-100-5 EPS-40-12 EPS-100-12 EPS-145-12 EPS-145-24
Switching Frequency
36 Khz. 25Khz. 36Khz. 25Khz. 25Khz. 25Khz.
Input Voltage Range 85-130 V AC or 190V – 270 V AC
(Selectable by inbuilt Switch)
Universal
(85-270 V AC)
85-130 V AC or 190V-270 AC
(Selectable by inbuilt Switch)
Inrush current 25A at 115V input, 50A at 230V input
Output voltage and
adjustable range
5V DC
(-5 to +10%)
5V DC
(-5 to + 10%)
12V DC
(+/-10%)
12V DC
(+/-10%)
12V DC
(+/-10%)
24V DC
(+/-10%)
Output Voltage Ripple 150 mV pk-pk (maximum)
Leakage Current 3.5 mA at 230 V AC (maximum)
Output Current Range 0-3A 0-20A 0-3.5A 0-8.5A 0-12A 0-6A
Efficiency 65% 78% 76% 81% 83% 80%
Over Load Protection 115-150% 135-150% 115-150% 135-150% 135-150% 135-150%
Dimensions (LxWxH) mm.
99x97x36 199x98x38 129x98x38 199x98x38 199x98x38 199x98x38
Mounting Screws 2-M3 3-M3 2-M3 3-M3 3-M3 3-M3
Cooling Free Air convection cooling
Weight 310 g. 620 g. 440 g. 620 g. 710 g. 710 g.
             
Note :
(A) For proper cooling of the power supply ensure a clearance of at least 2.0 cm on the top and at least one side of the power supply.
(B) Load regulation and line regulation are +/-2% for +5V DC output SMPS (instead of 1%)
(C) Overload protection for 145W SMPS is shutdown type and recovery is not automatic when overload is removed.
     Input power has to be ogled off then on to get power again for SMPS.
 
All dimensions are in mm.
Due to continuous improvement in products, we reserve the right to alter specifications without prior notice.
 
Previous1234Next