MICRO CONTROL SEALED SWITCHES MV - SERIES (Ø 22.5 mm.)
 
 
Characteristics
  • All the bezels and actuators are made form Zinc alloy.
  • Explosive protection for volatile atmosphere.
  • 2 circuit double break snap action mechanism.
  • 1 NO + 1 NC contacts with form Z arrangement.
  • Spring controlled pivoted mechanism.
  • Rapid changeover of contacts ensures reliable bi-stability.
  • Long mechanical and electrical life.
  • Silver alloy or Silver alloy Gold plated contacts.
  • Wide temperature range (-40°C to +125°C).
  • Panel sealed product - IP67 protection against immersion.
  • Ideal for robust, potentially explosive environments, such as mining industry.
  • Push buttons available in Red, Green & Black colours. State colour while ordering.
  • Conform to IEC 1058-1 standard.
 
Ordering code MV16()P6
Actuating force
Travel
Contact rating
Contact resistance
Dielectric strength
Insulation resistance
Electrical life
Mechanical life
Contact life
Temperature
Contact material
Terminals
Body material
Actuator material
Cut-out size 		700 gms. (max.)
2.5 mm. (max.)
7 Amp. resistive at 28V DC / 250V AC
100 milliohm (max.)
1000V AC rms.
1000 Mohms (min.)
100,000 operations at rated load
15,000,000 switching cycles (typical)
10,000,000 operations
-40°C to +125°C
Silver alloy
Tin plated copper alloy
Zinc alloy
Zinc alloy
Ø22.5 mm.
 
Panel mounting & construction information :The micro control switches easily mount to panels of 6 mm. thickness. IP67 protection is achieved by using a sealing washer which is fitted to the switch. It is held into panel by zinc locknut, tightened down by a tool to achieve the correct sealing pressure. It is mounted into a standard 22.5 mm. dia. hole and a double "d" flat is provided to prevent rotation.

Note :
1. Place'S' for silver plated and 'G' for gold plated contacts in bracket'()' against ordering code of micro switch.
2. Add following suffix at * in the ordering code of micro control switch for knob colour.
    Red    =  R
    Green =  G
    Black =   B

All dimensions are in mm.
Due to continuous improvement in products, we reserve the right to alter specifications without prior notice