|
8 Pin base |
mode
Delay on energise
Interval on
Cyclic |
Ordering Code
2KA DE()LP*
2KA IT()LP*
2KA CY()LP*
|
|
Screw terminal base |
Mode
Delay on energise
Interval on
Cyclic |
Ordering Code
2KC DE()LP*
2KC IT()LP*
2KC CY()LP* |
|
Put desired value of following time range and supply voltage in () and * respectively
in ordering code while placling the order. |
() -Time range
1,2,5,10,30,60 S(seconds)
2,5,10,30,60 M(minutes)
2,5,10,30,60 H(hours) |
* - Supply voltage
12,24,48,110,230 VAC
12,24,48,110 V DC
M -24 to 220 V AC/DC(multivoltage) |
|
|
Ordering Code |
Number of Change
over contacts:
|
Series
|
Base Configuration |
Mode |
Time range |
Adjustment Mode |
Supply voltage |
|
2 |
K |
B |
DE |
105 |
LP |
230V AC |
|
|
|
A:11 Pin base
B: 8 Pin base
C: Screw terminal base |
DE
IT
CY
*IC
*DC |
1,2,5,10,30,60 S(seconds)
2,5,10,30,60 M(minutes)
2,5,10,30,60 H(hours)
1,2,5,10,30,60 S(seconds)
2,5 M(minutes) |
LP-Local pot
RP-Remote pot
FT-Fixed time |
12,24,48,110,230 V AC
12,24,48,110 V DC
M-24V To 220V AC/DC |
|
|
Notes 1. Remote pot (RP) and fixed time(FT) are also available.
2. Remote pot is available in 11 pin base only.
3. 1 C/o & 3 C/o contacts are also available.
4. Panel mounting clamps DKN are also available.
5. For IC & DC timers (i) Time range to be
mentioned for both ON and OFF periods. eg. Timer with 5 sec. ON and 60 sec OFF,
immediate cycle ordering code is 2KBIC5S-60SLP 230V AC.
(ii)
ON and OFF time periods are controlled by two separate knobs provided on the times.
(iii)
Remote pot (RP) is not available in IC and DC Timers.
All dimensions are in mm.
Due to continuous improvement in products, we reserve the right to alter specifications
without prior notice
|
|
|
|
|